For more information on our repairs for the surface Pro please visist our repairs pages : surface pro repair
UPS showed up, let's see what's inside, I think I know what's inside.... it's a surface pro.... what is wrong with it... let's try to turn it on... and it's dead mate.. let's open it up...let's heat it up so we can get a good separation on the LCD screen... and we're almost there. We're able to separate it here..... as much as I would love to think nobody has opened this one up, before there were no shields here to remove and I highly doubt it was never opened up before..... let's see what's going on.... I got the multi meter and we're gonna test the voltage... and again it's supposed to say 0 and it says 5 volts here, we have some sort of leak in the 0 Volt Line here.. this has some sort of weird ground on the whole plane which is not a ground but it's a 0 volt.. we tested this the 3 volt line and we got nothing...... let's replace the power IC chip and test and so right here remove the PMIC. and a bunch of capacitors here because we noticed there's a short ... we're getting 0 here as we should and we have the 3 volts right now.... here it is we got it.