XB1S console with a broken HDMI port - TDR - National Repair Center
Due tot he fact that Xbox One S models' HDMI ports are not out in the parts market, It is a more challenging repair. Though we do have a solution. We replaced the HDMI OUT with the HDMI IN port as most users do not use that port. With consent from the owner we were able to repair there device. Though it does add an extra weight on the technicians shoulder to have to perfectly remove a component for replacement.
It requires a few in depth steps than I am about to describe but the high level point picture of the repairs goes as follows:
Disassemble the Xbox one, removing and cleaning out the motherboard completely.
Ad flux and solder the the zinc solder with more less resistant solder material.
With a heat gun at a good temperature above melting point but below burning heat up the part and remove it carefully.
Clean out the pads with solder flux and clean out all the old solder.
Align the HDMI port with the new placement on the motherboard. carefully through a 100x and above microscope.
Solder each pin with a fine tip. and solder the mounts on the side with lots of solder.